Layers :

Layer: NZ Coastlines and Islands 50k (ID: 0)



Display Field: name

Type: Feature Layer

Geometry Type: esriGeometryPolygon

Description: This provides a polygon coastline and islands layer which is based on the Topo50 products. It is a combination of the following layers: - [NZ Coastlines (Topo 1:50k)](http://data.linz.govt.nz/layer/258-nz-coastlines-topo-150k/) - [NZ Island Polygons (Topo 1:50k)](http://data.linz.govt.nz/layer/288-nz-island-polygons-topo-150k/) - [NZ Auckland Is Island Polygons (Topo, 1:50k)](http://data.linz.govt.nz/layer/959-nz-auckland-is-island-polygons-topo-150k/) - [NZ Campbell Is / Motu Ihupuku Island Polygons (Topo, 1:50k)](http://data.linz.govt.nz/layer/932-nz-campbell-is-motu-ihupuku-island-polygons-topo-150k/) - [NZ Antipodes Is Island Polygons (Topo, 1:25k)](http://data.linz.govt.nz/layer/978-nz-antipodes-is-island-polygons-topo-125k/) - [NZ Kermadec Is Island Polygons (Topo, 1:25k)](http://data.linz.govt.nz/layer/908-nz-kermadec-is-island-polygons-topo-125k/) - [NZ Bounty Is Island Polygons (Topo, 1:25k)](http://data.linz.govt.nz/layer/992-nz-bounty-is-island-polygons-topo-125k/) - [NZ Snares Is / Tini Heke Island Polygons (Topo, 1:25k)](http://data.linz.govt.nz/layer/893-nz-snares-is-tini-heke-island-polygons-topo-125k/) - [NZ Chatham Is island polygons (Topo, 1:50k)](http://data.linz.govt.nz/layer/86-nz-chatham-is-island-polygons-topo-150k/) Islands from the NZ Island Polygons layer that lie within the NZ Coastline and Chatham Islands areas (i.e. islands in lakes, rivers and estuaries) have been removed. The GIS workflow to create the layer is: 1. NZ Coastlines were converted from a polyline to a polygon using a polyline to polygon tool. 2. The resulting coastal polygon was then used as an input into an erase tool and run against the NZ Island Polygon layer to remove all islands lying within the NZ Mainland and Stewart Island. 3. This was then merged with the NZ Chatham Is island polygons (Topo, 1:50k) that have had the islands within the main island polygon removed, NZ Auckland Is Island Polygons (Topo, 1:50k), NZ Campbell Is / Motu Ihupuku Island, NZ Antipodes Is Island Polygons (Topo, 1:25k), NZ Kermadec Is Island Polygons (Topo, 1:25k), NZ Bounty Is Island Polygons (Topo, 1:25k) and NZ Snares Is / Tini Heke Island Polygons (Topo, 1:25k) layers using a merge tool. 4. Lake Onoke from the NZ Lake Polygons (Topo 1:50k) layer and Te Whanga Lagoon from the NZ Chatham Is lagoon polygons (Topo, 1:50k) layer were then erased from the resultant polygon layer to include these two water bodies in the coastline definition. For more detailed description of each layer refer to the layer urls above.

Definition Expression: $layer.definitionExpression

Copyright Text:

Min. Scale: 0

Max. Scale: 0

Default Visibility: false

Extent:

XMin: 5541896.385499999
YMin: -5199293.852499999
XMax: 7054377.491599999
YMax: -2557822.4288000017
Spatial Reference: 3994


Has Attachments: false

HTML Popup Type: esriServerHTMLPopupTypeAsHTMLText

Type ID Field: null

Fields:
• OBJECTID (Type: esriFieldTypeOID, Alias: OBJECTID)
• name (Type: esriFieldTypeString, Alias: name)
• macronated (Type: esriFieldTypeString, Alias: macronated)
• grp_macron (Type: esriFieldTypeString, Alias: grp_macron)
• TARGET_FID (Type: esriFieldTypeInteger, Alias: TARGET_FID)
• grp_ascii (Type: esriFieldTypeString, Alias: grp_ascii)
• grp_name (Type: esriFieldTypeString, Alias: grp_name)
• name_ascii (Type: esriFieldTypeString, Alias: name_ascii)
• SHAPE (Type: esriFieldTypeGeometry, Alias: SHAPE)
• SHAPE.STArea() (Type: esriFieldTypeDouble, Alias: SHAPE.STArea())
• SHAPE.STLength() (Type: esriFieldTypeDouble, Alias: SHAPE.STLength())
Layer: NZ Coastlines and Islands 50k_8k (ID: 1)


Display Field: name

Type: Feature Layer

Geometry Type: esriGeometryPolygon

Description: This provides a polygon coastline and islands layer which is based on the Topo50 products. It is a combination of the following layers: - [NZ Coastlines (Topo 1:50k)](http://data.linz.govt.nz/layer/258-nz-coastlines-topo-150k/) - [NZ Island Polygons (Topo 1:50k)](http://data.linz.govt.nz/layer/288-nz-island-polygons-topo-150k/) - [NZ Auckland Is Island Polygons (Topo, 1:50k)](http://data.linz.govt.nz/layer/959-nz-auckland-is-island-polygons-topo-150k/) - [NZ Campbell Is / Motu Ihupuku Island Polygons (Topo, 1:50k)](http://data.linz.govt.nz/layer/932-nz-campbell-is-motu-ihupuku-island-polygons-topo-150k/) - [NZ Antipodes Is Island Polygons (Topo, 1:25k)](http://data.linz.govt.nz/layer/978-nz-antipodes-is-island-polygons-topo-125k/) - [NZ Kermadec Is Island Polygons (Topo, 1:25k)](http://data.linz.govt.nz/layer/908-nz-kermadec-is-island-polygons-topo-125k/) - [NZ Bounty Is Island Polygons (Topo, 1:25k)](http://data.linz.govt.nz/layer/992-nz-bounty-is-island-polygons-topo-125k/) - [NZ Snares Is / Tini Heke Island Polygons (Topo, 1:25k)](http://data.linz.govt.nz/layer/893-nz-snares-is-tini-heke-island-polygons-topo-125k/) - [NZ Chatham Is island polygons (Topo, 1:50k)](http://data.linz.govt.nz/layer/86-nz-chatham-is-island-polygons-topo-150k/) Islands from the NZ Island Polygons layer that lie within the NZ Coastline and Chatham Islands areas (i.e. islands in lakes, rivers and estuaries) have been removed. The GIS workflow to create the layer is: 1. NZ Coastlines were converted from a polyline to a polygon using a polyline to polygon tool. 2. The resulting coastal polygon was then used as an input into an erase tool and run against the NZ Island Polygon layer to remove all islands lying within the NZ Mainland and Stewart Island. 3. This was then merged with the NZ Chatham Is island polygons (Topo, 1:50k) that have had the islands within the main island polygon removed, NZ Auckland Is Island Polygons (Topo, 1:50k), NZ Campbell Is / Motu Ihupuku Island, NZ Antipodes Is Island Polygons (Topo, 1:25k), NZ Kermadec Is Island Polygons (Topo, 1:25k), NZ Bounty Is Island Polygons (Topo, 1:25k) and NZ Snares Is / Tini Heke Island Polygons (Topo, 1:25k) layers using a merge tool. 4. Lake Onoke from the NZ Lake Polygons (Topo 1:50k) layer and Te Whanga Lagoon from the NZ Chatham Is lagoon polygons (Topo, 1:50k) layer were then erased from the resultant polygon layer to include these two water bodies in the coastline definition. For more detailed description of each layer refer to the layer urls above.

Definition Expression: $layer.definitionExpression

Copyright Text:

Min. Scale: 0

Max. Scale: 0

Default Visibility: false

Extent:

XMin: 5541896.385499999
YMin: -5199293.852400001
XMax: 7054377.491599999
YMax: -2557822.4288000017
Spatial Reference: 3994


Has Attachments: false

HTML Popup Type: esriServerHTMLPopupTypeAsHTMLText

Type ID Field: null

Fields:
• OBJECTID (Type: esriFieldTypeOID, Alias: OBJECTID)
• name (Type: esriFieldTypeString, Alias: name)
• macronated (Type: esriFieldTypeString, Alias: macronated)
• grp_macron (Type: esriFieldTypeString, Alias: grp_macron)
• TARGET_FID (Type: esriFieldTypeInteger, Alias: TARGET_FID)
• grp_ascii (Type: esriFieldTypeString, Alias: grp_ascii)
• grp_name (Type: esriFieldTypeString, Alias: grp_name)
• name_ascii (Type: esriFieldTypeString, Alias: name_ascii)
• MaxSimpTol (Type: esriFieldTypeDouble, Alias: MaxSimpTol)
• MinSimpTol (Type: esriFieldTypeDouble, Alias: MinSimpTol)
• SHAPE (Type: esriFieldTypeGeometry, Alias: SHAPE)
• SHAPE.STArea() (Type: esriFieldTypeDouble, Alias: SHAPE.STArea())
• SHAPE.STLength() (Type: esriFieldTypeDouble, Alias: SHAPE.STLength())
Layer: NZ Coastline 50k_150K (ID: 2)


Display Field: MaxSimpTol

Type: Feature Layer

Geometry Type: esriGeometryPolygon

Description: This provides a polygon coastline and islands layer which is based on the Topo50 products. It is a combination of the following layers: - [NZ Coastlines (Topo 1:50k)](http://data.linz.govt.nz/layer/258-nz-coastlines-topo-150k/) - [NZ Island Polygons (Topo 1:50k)](http://data.linz.govt.nz/layer/288-nz-island-polygons-topo-150k/) - [NZ Auckland Is Island Polygons (Topo, 1:50k)](http://data.linz.govt.nz/layer/959-nz-auckland-is-island-polygons-topo-150k/) - [NZ Campbell Is / Motu Ihupuku Island Polygons (Topo, 1:50k)](http://data.linz.govt.nz/layer/932-nz-campbell-is-motu-ihupuku-island-polygons-topo-150k/) - [NZ Antipodes Is Island Polygons (Topo, 1:25k)](http://data.linz.govt.nz/layer/978-nz-antipodes-is-island-polygons-topo-125k/) - [NZ Kermadec Is Island Polygons (Topo, 1:25k)](http://data.linz.govt.nz/layer/908-nz-kermadec-is-island-polygons-topo-125k/) - [NZ Bounty Is Island Polygons (Topo, 1:25k)](http://data.linz.govt.nz/layer/992-nz-bounty-is-island-polygons-topo-125k/) - [NZ Snares Is / Tini Heke Island Polygons (Topo, 1:25k)](http://data.linz.govt.nz/layer/893-nz-snares-is-tini-heke-island-polygons-topo-125k/) - [NZ Chatham Is island polygons (Topo, 1:50k)](http://data.linz.govt.nz/layer/86-nz-chatham-is-island-polygons-topo-150k/) Islands from the NZ Island Polygons layer that lie within the NZ Coastline and Chatham Islands areas (i.e. islands in lakes, rivers and estuaries) have been removed. The GIS workflow to create the layer is: 1. NZ Coastlines were converted from a polyline to a polygon using a polyline to polygon tool. 2. The resulting coastal polygon was then used as an input into an erase tool and run against the NZ Island Polygon layer to remove all islands lying within the NZ Mainland and Stewart Island. 3. This was then merged with the NZ Chatham Is island polygons (Topo, 1:50k) that have had the islands within the main island polygon removed, NZ Auckland Is Island Polygons (Topo, 1:50k), NZ Campbell Is / Motu Ihupuku Island, NZ Antipodes Is Island Polygons (Topo, 1:25k), NZ Kermadec Is Island Polygons (Topo, 1:25k), NZ Bounty Is Island Polygons (Topo, 1:25k) and NZ Snares Is / Tini Heke Island Polygons (Topo, 1:25k) layers using a merge tool. 4. Lake Onoke from the NZ Lake Polygons (Topo 1:50k) layer and Te Whanga Lagoon from the NZ Chatham Is lagoon polygons (Topo, 1:50k) layer were then erased from the resultant polygon layer to include these two water bodies in the coastline definition. For more detailed description of each layer refer to the layer urls above.

Definition Expression: $layer.definitionExpression

Copyright Text:

Min. Scale: 0

Max. Scale: 0

Default Visibility: false

Extent:

XMin: 5541935.1719
YMin: -5199293.852400001
XMax: 7054377.491599999
YMax: -2557822.4288000017
Spatial Reference: 3994


Has Attachments: false

HTML Popup Type: esriServerHTMLPopupTypeAsHTMLText

Type ID Field: null

Fields:
• OBJECTID (Type: esriFieldTypeOID, Alias: OBJECTID)
• MaxSimpTol (Type: esriFieldTypeDouble, Alias: MaxSimpTol)
• MinSimpTol (Type: esriFieldTypeDouble, Alias: MinSimpTol)
• SHAPE_STArea__ (Type: esriFieldTypeDouble, Alias: SHAPE_STArea__)
• SHAPE_STLength__ (Type: esriFieldTypeDouble, Alias: SHAPE_STLength__)
• Shape (Type: esriFieldTypeGeometry, Alias: Shape)
• Shape.STArea() (Type: esriFieldTypeDouble, Alias: Shape.STArea())
• Shape.STLength() (Type: esriFieldTypeDouble, Alias: Shape.STLength())
Layer: NZ Coastlines and Islands 50k_2500k (ID: 3)


Display Field: MaxSimpTol

Type: Feature Layer

Geometry Type: esriGeometryPolygon

Description: This provides a polygon coastline and islands layer which is based on the Topo50 products. It is a combination of the following layers: - [NZ Coastlines (Topo 1:50k)](http://data.linz.govt.nz/layer/258-nz-coastlines-topo-150k/) - [NZ Island Polygons (Topo 1:50k)](http://data.linz.govt.nz/layer/288-nz-island-polygons-topo-150k/) - [NZ Auckland Is Island Polygons (Topo, 1:50k)](http://data.linz.govt.nz/layer/959-nz-auckland-is-island-polygons-topo-150k/) - [NZ Campbell Is / Motu Ihupuku Island Polygons (Topo, 1:50k)](http://data.linz.govt.nz/layer/932-nz-campbell-is-motu-ihupuku-island-polygons-topo-150k/) - [NZ Antipodes Is Island Polygons (Topo, 1:25k)](http://data.linz.govt.nz/layer/978-nz-antipodes-is-island-polygons-topo-125k/) - [NZ Kermadec Is Island Polygons (Topo, 1:25k)](http://data.linz.govt.nz/layer/908-nz-kermadec-is-island-polygons-topo-125k/) - [NZ Bounty Is Island Polygons (Topo, 1:25k)](http://data.linz.govt.nz/layer/992-nz-bounty-is-island-polygons-topo-125k/) - [NZ Snares Is / Tini Heke Island Polygons (Topo, 1:25k)](http://data.linz.govt.nz/layer/893-nz-snares-is-tini-heke-island-polygons-topo-125k/) - [NZ Chatham Is island polygons (Topo, 1:50k)](http://data.linz.govt.nz/layer/86-nz-chatham-is-island-polygons-topo-150k/) Islands from the NZ Island Polygons layer that lie within the NZ Coastline and Chatham Islands areas (i.e. islands in lakes, rivers and estuaries) have been removed. The GIS workflow to create the layer is: 1. NZ Coastlines were converted from a polyline to a polygon using a polyline to polygon tool. 2. The resulting coastal polygon was then used as an input into an erase tool and run against the NZ Island Polygon layer to remove all islands lying within the NZ Mainland and Stewart Island. 3. This was then merged with the NZ Chatham Is island polygons (Topo, 1:50k) that have had the islands within the main island polygon removed, NZ Auckland Is Island Polygons (Topo, 1:50k), NZ Campbell Is / Motu Ihupuku Island, NZ Antipodes Is Island Polygons (Topo, 1:25k), NZ Kermadec Is Island Polygons (Topo, 1:25k), NZ Bounty Is Island Polygons (Topo, 1:25k) and NZ Snares Is / Tini Heke Island Polygons (Topo, 1:25k) layers using a merge tool. 4. Lake Onoke from the NZ Lake Polygons (Topo 1:50k) layer and Te Whanga Lagoon from the NZ Chatham Is lagoon polygons (Topo, 1:50k) layer were then erased from the resultant polygon layer to include these two water bodies in the coastline definition. For more detailed description of each layer refer to the layer urls above.

Definition Expression: $layer.definitionExpression

Copyright Text:

Min. Scale: 0

Max. Scale: 0

Default Visibility: false

Extent:

XMin: 5541935.1719
YMin: -5199293.852400001
XMax: 7053895.8902
YMax: -2557822.4288000017
Spatial Reference: 3994


Has Attachments: false

HTML Popup Type: esriServerHTMLPopupTypeAsHTMLText

Type ID Field: null

Fields:
• OBJECTID (Type: esriFieldTypeOID, Alias: OBJECTID)
• MaxSimpTol (Type: esriFieldTypeDouble, Alias: MaxSimpTol)
• MinSimpTol (Type: esriFieldTypeDouble, Alias: MinSimpTol)
• SHAPE (Type: esriFieldTypeGeometry, Alias: SHAPE)
• SHAPE.STArea() (Type: esriFieldTypeDouble, Alias: SHAPE.STArea())
• SHAPE.STLength() (Type: esriFieldTypeDouble, Alias: SHAPE.STLength())